Runway 7 Departure KAUN local VFR procedures

The current flow at KAUN is uncertain right now (WIND_INFERRED), so whether this procedure applies at this moment is unknown. Live runway page →

Not for navigation. Verify against the official sources linked below before flight.

vfr departure Chart Supplement verified 2026-08-29 (41 d ago)

Published airport remark; advisory. If ATC assigns this route to you in Class B, C or D airspace, that assignment is an ATC instruction and compliance is required (14 CFR 91.123) — and “unable” remains available to the pilot in command.

Turn on course only after reaching 2,500 ft MSL; avoid the noise sensitive areas.

The route

Turn on course after reaching 2,500 ft MSL
Avoid noise sensitive areas
All departures: use minimum power while observing safe aircraft operations

When it applies

Departing 7 — east flow "RWY 07 TURN ON CRS AFTER REACHING 2500 MSL"

Source text, verbatim

RWY 07 TURN ON CRS AFTER REACHING 2500 MSL.  AVOID NOISE SENSITIVE AREAS.  SEE NOISE ABATEMENT BROCHURE.

The text above is the published source wording and is authoritative over any summary on this page.

Sources

FAA Chart Supplement remark via NASR 28-day subscription, cycle 06 Aug 2026 (APT_RMK, AUN) Federal Aviation Administration · retrieved 2026-08-29

All KAUN procedures · KAUN runway in use