runwayinuse

KFIG Clearfield-Lawrence

?
UNKNOWN

Unknown — not enough evidence to call a runway

We don't know, and saying so beats guessing. No D-ATIS feed here — a voice ATIS/AWOS may exist; check the frequency. No ADS-B traffic data available. Weather observation is 1249 minutes old — treat with caution.

certainty: — evidence: NONE no tower now

N 30 12

Wind 200° true at 3 kt · · 1249 min old

▶ Listen live — ATIS/CTAF on LiveATC opens LiveATC’s own player · verify the broadcast yourself

30 50% 4499 ft · 0 kt head, 3 kt x-left
12 50% 4499 ft · 0 kt TAIL, 3 kt x-right

Active NOTAMs affecting runways

LIGHTING RWY 30 until 04-06 21:11Z
RWY 30 RWY END ID LGT U/S
Why — evidence behind this answer

Runway 30

Runway 12

Sources consulted

sourcestatus agenote
D_ATISUNAVAILABLE No D-ATIS at this field
METAROK 1249 min
ADSBUNAVAILABLE No ADS-B track history here yet
NOTAMOK
CIFPNOT_CONFIGURED Instrument procedures: phase 4

Recent operations

No operations observed in the last hour. (No ADS-B track history here yet)

Was this right?

KFIG field & runways

Clearfield-Lawrence, Clearfield, Pennsylvania. Field elevation 1516 ft. Non-towered (NON-ATCT). Magnetic variation 10.0°W on record, 10.3°W today.

The FAA's variation of record is the number this field was surveyed against; the second is where north points now, from WMM2025. It is moving 0.015°/year east — about 1° every 67 years — which is why runway numbers eventually stop matching their pavement.

Runway data from the FAA NASR 01 Oct 2026 cycle. Where NASR locates both thresholds, the true heading is the bearing between them rather than NASR's whole-degree alignment. Magnetic is that heading against today's declination from WMM2025, not the field's variation of record — so it can differ from the chart by the gap between the two shown above. The number painted on the runway is the one ATC uses.
RunwayTrueMagnetic Number LengthSurfacePattern Notes
12 109.0° 119.2° matches 4,499 ft ASPH left
30 289.0° 299.2° matches 4,499 ft ASPH left

Generated 09:43:17Z · auto-refreshes · JSON