runwayinuse

KHBV Jim Hogg County

?
UNKNOWN

Unknown — not enough evidence to call a runway

We don't know, and saying so beats guessing. No D-ATIS feed here — a voice ATIS/AWOS may exist; check the frequency. ADS-B tracking just started here — traffic history is still building. Weather observation is 287 minutes old — treat with caution.

certainty: — evidence: NONE no tower now

N 13 31

Wind 170° true at 3 kt · VFR · 287 min old

▶ Listen live — ATIS/CTAF on LiveATC opens LiveATC’s own player · verify the broadcast yourself

13 51% 5003 ft · 2 kt head, 2 kt x-right
31 49% 5003 ft · 2 kt TAIL, 2 kt x-left
Why — evidence behind this answer

Runway 13

Runway 31

Sources consulted

sourcestatus agenote
D_ATISUNAVAILABLE No D-ATIS at this field
METAROK 287 min
ADSBWARMING_UP 3547 min Only 0 min of track history so far
NOTAMOK
CIFPNOT_CONFIGURED Instrument procedures: phase 4

Recent operations

No operations observed in the last hour. (Only 0 min of track history so far)

Was this right?

KHBV field & runways

Jim Hogg County, Hebbronville, Texas. Field elevation 663 ft. Non-towered (NON-ATCT). Magnetic variation 6.0°E on record, 3.6°E today.

The FAA's variation of record is the number this field was surveyed against; the second is where north points now, from WMM2025. It is moving 0.078°/year west — about 1° every 13 years — which is why runway numbers eventually stop matching their pavement.

Runway data from the FAA NASR 01 Oct 2026 cycle. Where NASR locates both thresholds, the true heading is the bearing between them rather than NASR's whole-degree alignment. Magnetic is that heading against today's declination from WMM2025, not the field's variation of record — so it can differ from the chart by the gap between the two shown above. The number painted on the runway is the one ATC uses.
RunwayTrueMagnetic Number LengthSurfacePattern Notes
13 134.4° 130.8° matches rule gives runway 14 in ~54 yr 5,003 ft ASPH left
31 314.4° 310.8° matches rule gives runway 32 in ~54 yr 5,003 ft ASPH left

Generated 08:41:53Z · auto-refreshes · JSON