runwayinuse

KLUL Hesler/Noble Fld

31
PROBABLE 60%

Runway 31 — wind slightly favors it, low confidence

Based mostly on wind; no traffic or ATIS to confirm. No D-ATIS feed here — a voice ATIS/AWOS may exist; check the frequency. No ADS-B traffic data available.

certainty: 60% evidence: NONE no tower now

N 31 13

Wind 360° true at 3 kt · VFR · 7 min old

▶ Listen live — ATIS/CTAF on LiveATC opens LiveATC’s own player · verify the broadcast yourself

31 58% 5513 ft · 2 kt head, 2 kt x-right
13 42% 5513 ft · 2 kt TAIL, 2 kt x-left

Active NOTAMs affecting runways

LIGHTING RWY 13 until 02-11 21:11Z
RWY 13 PAPI UNUSABLE
Why — evidence behind this answer

Runway 31

Runway 13

Sources consulted

sourcestatus agenote
D_ATISUNAVAILABLE No D-ATIS at this field
METAROK 7 min
ADSBUNAVAILABLE No ADS-B track history here yet
NOTAMOK
CIFPNOT_CONFIGURED Instrument procedures: phase 4

Recent operations

No operations observed in the last hour. (No ADS-B track history here yet)

Was this right?

KLUL field & runways

Hesler/Noble Fld, Laurel, Mississippi. Field elevation 238 ft. Non-towered (NON-ATCT). Magnetic variation 0.0°W on record, 2.3°W today.

The FAA's variation of record is the number this field was surveyed against; the second is where north points now, from WMM2025. It is moving 0.075°/year west — about 1° every 13 years — which is why runway numbers eventually stop matching their pavement.

Runway data from the FAA NASR 01 Oct 2026 cycle. Where NASR locates both thresholds, the true heading is the bearing between them rather than NASR's whole-degree alignment. Magnetic is that heading against today's declination from WMM2025, not the field's variation of record — so it can differ from the chart by the gap between the two shown above. The number painted on the runway is the one ATC uses.
RunwayTrueMagnetic Number LengthSurfacePattern Notes
13 135.0° 137.3° runway 14 by the rule today · 7.3° past 5,513 ft ASPH left
31 315.0° 317.3° runway 32 by the rule today · 7.3° past 5,513 ft ASPH left

Generated 08:42:07Z · auto-refreshes · JSON