OR61 Apple Valley

UNKNOWN

No runway-in-use estimate is possible here

The FAA's NASR data publishes no runway alignment for this field, so there is nothing to compute a wind component against and no way to tell which end an aircraft used. What is known about the field is below.

We don't know, and saying so beats guessing. No D-ATIS feed here — a voice ATIS/AWOS may exist; check the frequency. No ADS-B traffic data available.

certainty: — evidence: NONE no tower now

Wind 330° true at 4 kt · VFR · 26 min old · from KHIO (12.5 nm away)

▶ Listen live — ATIS/CTAF on LiveATC opens LiveATC’s own player · verify the broadcast yourself

11 50% 2470 ft

29 50% 2470 ft

Why — evidence behind this answer

Sources consulted

source	status	age	note
D_ATIS	UNAVAILABLE		No D-ATIS at this field
METAR	OK	26 min	Nearest station KHIO (12.5 nm away)
ADSB	UNAVAILABLE		No ADS-B track history here yet
NOTAM	OK
CIFP	NOT_CONFIGURED		Instrument procedures: phase 4

Recent operations

No operations observed in the last hour. (No ADS-B track history here yet)

Was this right?

OR61 field & runways

Apple Valley, Buxton, Oregon. Field elevation 247 ft. Non-towered (NON-ATCT). Private use. Magnetic variation 19.0°E on record, 14.6°E today.

The FAA's variation of record is the number this field was surveyed against; the second is where north points now, from WMM2025. It is moving 0.117°/year west — about 1° every 9 years — which is why runway numbers eventually stop matching their pavement.

Runway data from the FAA NASR 01 Oct 2026 cycle. Where NASR locates both thresholds, the true heading is the bearing between them rather than NASR's whole-degree alignment. Magnetic is that heading against *today's* declination from WMM2025, not the field's variation of record — so it can differ from the chart by the gap between the two shown above. The number painted on the runway is the one ATC uses.
Runway	True	Magnetic	Number	Length	Surface	Pattern	Notes
11	not published		—	2,470 ft	TURF
29	not published		—	2,470 ft	TURF

Generated 10:19:27Z · auto-refreshes · JSON